NG-7S PICKUP

Portable bridge-mounted piezo for extended-range nylon-string guitar

NG-7S is the perfect solution for 7-string classical guitar players who want to capture the sound of their extended range instrument.

Live or in the studio, it's a classical guitar pickup that brings true nylon-string sound and does it without an installation that requires modification.

Also available as a 6-string classical guitar model (KNA NG-1)

Features Installation instructions Specifications Find dealer

Features

Install with no modification

Unlike other guitar pickups, NG-7s installs safely and securely on the 7-string classical or flamenco guitar tie block utilizing the tension of the strings.

Wood case

The piezo element is encased in elegant and stylish mahogany. The lightweight assembly offers maximum tonal sensitivity.

Natural sound

NG-1 has a passive design that reproduces the natural sound of the instrument with no need for a battery.

Complete set

Two cables are included — one 9-ft. 1/8" to 1/4" and one 3-ft. 1/8" to female 1/4" jumper with safety clip to connect with your instrument cable.

Instructions

Follow our installation guide through the following steps:

Loosen the strings of your guitar. Make sure there is enough space under the loops so the pickup can slide through without any pressure.

Slide the pickup under the string loops. Keep it positioned evenly on the tie bar while tightening the strings and retune.

Press the top button to open the safety clip. Insert your instrument cable into the opening and release the button.

Hold the pickup head securely when attaching and detaching the cable.

Attach the clip to a suitable part of your instrument strap, belt or belt loop.The jumper cable and safety clip will protect your pickup from accidental damage caused by the cable pulling on the head of the pickup.

You are ready to enjoy your new pickup!

Video Review

Specifications

Specifications
Weight	5g. / 0.176oz
Wood	Mahogany
Maximum Impedance	500 Ω
Cables
Jumper cable with safety clip	1meter / 3'
Amp cable	3meter / 9'
Measurements
Specified part	Letter	Size in MM (From)	Size in MM (to)	Size in INCH (From)	Size in INCH (to)
Transducer length	a	88,6	88,8	3,488	3,496
Jack housing length	b	17,3	17,4	0,681	0,685
Total pickup length	c	105,0	105,1	4,134	4,138
Transducer width	d	9,3	9,4	0,366	0,370
Active signal transfer area length	e	85,0	-	3,346
Transducer thickness	f	2,1	2,2	0,083	0,087
Jack housing height	g	9,2	9,3	0,362	0,366
*Our handmade pickups may vary slightly in size due to the nature of the building