I want to leave my bridge-mounted KNA pickup on my guitar, but my hard case doesn't close. What can I do?

Date: 13.12.2021

Whether wood or molded ABS, most hard cases will have a rigid foam that's below the interior lining. This interior foam can be pressed down to make a little extra space. Just make a note of where the pickup is touching. Your case may already have an imprint of where the bridge makes contact. If not, you could place a bit of masking tape with the adhesive side up on the top of the pickup, close the case, and the tape will be where you'll need to compress the foam. Turn the case around so the top is on the floor, be careful not to put pressure on the hinges, and press the spot you need to have more space. Usually, a little gentle pressure with your knee is all it takes.    

More GUITAR / UKULELE PICKUPS QUESTIONS

Can SG-1/2 be used with nylon strings or NG-1/2 with metal strings?

Will the NG-7S and NG-2 7S pickups also work on a 6-string guitar?

I'm looking for a pickup for my nylon string guitar, but I use ball-end strings on a strung-through bridge (not bridge pins). Is there a way to use the NG-2 with this type of guitar? If not, would the SG-2 work?

How many mm (or inches) must be the diameter of the soundhole to fit the magnetic HP-1A?